網頁 貼吧 文章 作者 工作  
網頁搜尋
 
 愛PO吧 >> 玉山投票 >> 瀏覽文章
回覆 加入我的最愛 與好友分享

How PMON works on EPIA-M900

本被文章 0 次, 共有回覆 0  
0
 
0
office 2010 人妻[hr]

Recently, VIA releases new BIOS for EPIA-M900 with a new function: "PMON".
By manual, when PMON is enabled, Nano x2 can run at highest 1.73 GHz.
Therefore, I test M900 with PMON enabled and compare with previous BIOS(fixed 1.6 GHz).
The results is as following:

You may notice that several scores have no obvious difference.
This is very curious, because these scores should be better due to increased speed.

I remember Nano's frequency control is related to temperature.
So I enhance cooling system and re-test these items.
The result is as following:
水的探索
It looks more reasonable.




In order to find out the relationship between PMON and temperature, I turn fan speed to control temperature.Run two sp2004 to burn CPU, and use HWiNFO32 v3.82 to monitor temperature reading and running frequency. Then, I do find the rule about PMON:


When temperature is under 48°C, both cores run at 1.73 GHz.


48°C is the first threshold. Over 48°C, one core runs at 1.73 GHz and the other runs at 1.6GHz.
樂大師

52°C is the second threshold. Over 52°C, both cores run at default 1.6 GHhz.




Summary:

When PMON is enabled on EPIA-M900, NANOx2 runs as following:
1. Under 48°C: Both cores run at 1.73 GHz.
2. Between 48°C ~ 52°C: One core runs at 1.73 GHz and the other runs at 1.6GHz.
3. Over 52°C: Both cores run at default 1.6 GHhz.


//

逛上一篇:   逛下一篇:

作者: dgmscjcwj
  (2011-12-06 08:45)
推薦文章: 將本文章推薦到【百度收藏】 將本文章推薦到【YouPush】 將本文章推薦到【udn共享書籤】 將本文章推薦到【Fiigo】書籤

 本文章共有回覆 0 篇,分 1 頁
 聲明:以上內容不代表本站立場,且內容由網友發表提供,若有爭議或違法由發表者承擔,本站將不負責連帶責任,謝謝。

 IPoBar  愛PK  愛遊戲  愛online
新手教學 客服中心 站務公告 交換連結 合作提案 關於我們
 
版權所有©ipobar Ltd., All Rights Reserved.
論壇內會員言論僅代表個人觀點,不代表本站同意其說法,本討論區不承擔由該言論所引起的法律責任